ratchet tie down

Cam buckle Operating Instructions cam buckle To Tighten: When the end fittings of the Cam Buckle assembly are properly in place, push and apply pressure to the area on the Cam Buckle printed, "PRESS". Pull webbing slack through the buckle. Tighten the strap by pulling the webbing through the Cam Buckle until desired tension is complete. By releasing pressure from the area marked "PRESS", the Cam Buckle Assembly will be locked in place. To Release: To release, apply pressure to the area on the Cam Buckle printed, "PRESS", and pull the webbing away from the Cam Buckle . www.chinatoplifting.com tracy@chinatoplifting.com #cambuckle #ratchetbuckle #ratchetstrap #ratchettiedown #tiedownstrap #cargorestraint #cargocontrol #webbingsling #roundsling #liftingsling #lashingweb #ratchettiedownstrap

What is the ratchet strap ? ratchet strap/ratchet tie down Ratchet straps (also called ratchet tie down , lashing straps or tie downs ) are fasteners used to hold down cargo or equipment during transport. Ratchet straps are essentially webbing that is outfitted with tie down hardware . This hardware allows the ratchet strap to attach to the area surrounding the cargo or equipment, loop over the cargo or equipment, and/or attach to the cargo or equipment. It usually also includes a method of tensioning the strap , such as a ratchet . How to use the ratchet strap ? Step 1 ratchet buckle To thread ratchet buckle , place webbing THROUGH slot in center rotating spool of the closed ratchet. Step 2 ratchet tie down/ratchet strap Pull webbing through, leaving some slack. Step 3 ratchet buckle Start ratcheting (raising and lowering handle). Step 4 ratchet strap/ratchet tie down Webbing will wind itself and be locked in pl